Murrelektronik offers one of the largest cordset lineups on the market for connecting sensors and valves. They are durable, available in a variety of styles, and the majority of the styles are in stock.

... Full Description

Single and three phase switch mode power supply.

... Full Description

Cube67 is Murrelektonik's modular fieldbus system, with single cable technology, multi-function modules (eg analog, digital and special function modules), bus nodes for the major protocols, and installation lengths up to 60 meters.

... Full Description

The new adapter grommets fit the icotek split systems and offer completely new perspectives for a secure cable entry.

... Full Description

Icotek's system uses a split frame and split inserts which provide quick, convenient and cost effective routing of pre-terminated and standard cables. This alleviates the need to cut and re-wire pre-terminated cables.

... Full Description

The icotek strain relief systems stand for high cable density, various types of installation possibilities and reliable support according to EN 62444.

... Full Description

Remote I/O blocks for a centralized I/O with modular function modules with up to 32 channels per module.

... Full Description

Murrelektronik's modular Cube20S I/O system expands the field-tested Cube family with another IP20 product line with many features. The compact modules are only 12.9 millimeter wide. Thanks to their modular design they can be easily, quickly and individually connected – the integrated  backplane bus connects the modules to power and data.

... Full Description

8 amp 24 volt DC IP67 wash down rated power supply.

... Full Description

The fully potted and sealed Exact12 series allows you to have pluggable connections from the process back to the control box. T-Couplers can be used to double-assign each M12 connector, saving even more space and cable runs.

... Full Description

This very compact (30mm wide) distribution box has a high quality PUR cable perfect for C-track applications. For chemical and oil applications it is available with a PVC homerun cable. It can be mounted standard or from the side for limited space applications

... Full Description

Insulation Displacement Connectors (IDC) are a fast and easy way to terminate cables with either M8 or M12 connections. They are rated to IP67 and are rugged enough for tough environments.

... Full Description

The Impact20 I/O Modules are a cost-effective approach to fieldbus I/O in terminal boxes and control panels. The predefined inputs and outputs facilitate configuration. It provides single-channel diagnostics via LED, and group diagnostics via the Bus.

... Full Description

A distribution block with 5 available protocols (EtherNet/IP, EtherCAT, ProfiBus, Profinet, CANopen, and DeviceNet). Predefined I/O and LED's for channel diagnostics make the Impact67 easy to install and maintain.

... Full Description

Electronic circuit protector with selectable amperage of 1,2,3, and 4.

... Full Description

Modlink interfaces provide to the controls when diagnostics or service is necessary. The cabinet door stays closed so your machine or installation can maintain the recommended protection class.

... Full Description

Mico Pro is a modular system consisting of electronic auxiliary current switches and a power module for current monitoring.

... Full Description

The heavy-duty plug connectors of the Modlink Heavy series from Murrelektronik guarantee secure transmission of signals, energy, data and pneumatics – even in the roughest of industrial environments. They consistently protect interfaces from water, coolants and lubricants, dirt and high mechanical loads.

... Full Description

These rugged distribution blocks are resistant to heavy vibration, media, and weld splatter. Diagnostics are intuitive: if there is a problem, only the affected port shuts down, and a detailed message is sent to controls and indicated via LED.

... Full Description

This metal housing withstands mechanical and thermal stress, is fully potted, and comes with a molded cable or maintenance-friendly M23 plug connection. The LED power and output indicators simplify diagnostics.

... Full Description

The MVP12 steel distribution blocks solve the problem of routing cables in hygienic food and beverage applications. LED's at the port simplify diagnostics, and the IP69K, ECOLAB certified construction ensure minimal maintenance and replacement.

This IP69K stainless steel distribution box is designed for the food and beverage industry. A cable tray with 8 cables is replaced by a single home-run cable, creating a cleaner, easier to maintain environment.

... Full Description

The Solid 67 has M12 power, 5-pole, and is L-coded.

... Full Description

Unmanaged eithernet swithces.

... Full Description

By using T-couplers you reduce the number of cables required and you can combine inputs and outputs depending on the application.

... Full Description

Murrelektronik developed and produced the first pre-wired and molded valve connectors over 25 years ago. It features a captive sealing gasket, LED indicator, surge suppression, and multiple connector options.

... Full Description

Heavy duty washdown panel interface connector.

... Full Description

 These convenient access ports eliminate the need to open the panel door, creating a safer environment on the shop floor, and helping the user adhere to the safety standards set forth by NFPA 70E.

... Full Description

Mencom interfaces provide to the controls when diagnostics or service is necessary. The cabinet door stays closed so your machine or installation can maintain the recommended protection class.

... Full Description

Smallest radar sensor with very narrow beam cone and measurement range up to 40 m. Stable measuring signal, even with adverse ambient conditions and soiling of the sensor cap. Suitable for low temperatures, down to -40 °C. Designed for the most demanding environments IP68/ IP69K tested as well as proTect+.

... Full Description

Our classic position indicator is not snapped together like that of the competition - it is laser welded in a shock-proof, temperature-resistant housing. It is available in a variety of bores and resolutions, making the order process for your application fast and easy.

... Full Description

This programmable electronic position indicator is installed in a hand-wheel to show the axis position. It will remain vertical regardless of the position of the wheel, easily read at all times.

... Full Description

The EP20 consists of a position sensor and digital display for measuring linear or angular adjustments.

... Full Description

These couplings, available in lengths up to 5 meters long, can function at continuous high speed, and are extremely rugged. They can be used for remote adjustment of axes, transmission of mechanical rotating power, connection of two un-aligned elements, etc.

... Full Description

Fiama's assortment of gearboxes can be used for a simple right-angle axis adjustment, or can be combined into elaborate systems of multi-axis positioning.

... Full Description

Specialty application encoders with extra large bore, deep submersible, and ultra-high resolution encoders.

... Full Description

The DryLin leadscrew tables are off-the-shelf assemblies. Lubrication and maintenance free and available with accessories like positioning indicator, leadscrew clamps, adaptor plates and rotary knobs.

... Full Description

With excellent offerings from Dynapar, Hohner, and Joral, Sensors Inc. can provide the exact encoder for the application, meeting the requirements for resolution, communications protocol, form factor, and environment.

... Full Description

The Joral Hockey Puck and Prox Encoder are designed with a magnetic assembly that allows up to 1/2" air gap between the sensor face and element. They are fully sealed, rated IP69K, and able to operate fully submerged.

... Full Description

Northstar's magnetic encoders ( digital tachometers ) are specially designed for the rigors of steel mill equipment, with the largest non-contact air gap to protect it from variations in shaft concentricities.

... Full Description

Hygienic design stacklights with wash down applications.

... Full Description

Teledyne DALSA presents Falcon 4, the ultra-high resolution and high-speed CMOS camera. With 86 megapixels at 16 fps and a global shutter, the camera offers unique, unprecedented capabilities for large area, high resolution, high speed imaging. Available in monochrome, the camera is also sensitive into the NIR spectrum.

... Full Description

Dalsa's multi-line CMOS camera delivers amazing speed and responsivity with low noise. It delivers very high data throughput with long transmission distances and cable flexibility.

... Full Description

Sony CMOS [Pregius] adopted cameras are lined up High resolution,high speed CMOS sensors adopted Compact, robust and easy to attach.

... Full Description

All the benefits of the ace 2 Basic plus PGI feature set plus new, unique Beyond features from Basler for maximum performance.

The highlights of the ace 2 Pro at a glance: Compression Beyond for higher bandwidth on GigE using lossless compression, Pixel Beyond for uncomplicated sensor redesign through individual adjustment of pixel size and sensor characteristics, Popular PGI feature set from Basler included.

... Full Description

Advanced Illumination is a lighting solutions company, designing and manufacturing a broad range of LED lights and supporting electronics for machine vision applications.

... Full Description

Proven Basler reliability with extensive computer vision feature set for standard machine vision applications.

The highlights of the ace 2 Basic at a glance: Optimized hardware meets state-of-the-art CMOS sensor technology from Sony, Powerful Computer Vision feature set, unbeatable price/performance ratio for standard vision applications.

... Full Description

The ace L profits from the same evolutionary steps in firmware features as the ace U. Furthermore, it is capable of carrying high-resolution 9 and 12 MP Sony Pregius CMOS sensors with optical formats above 1". To accommodate these larger sensors, the camera housing is slightly larger than other ace models and has a footprint of 40 mm x 30 mm.

... Full Description

The CX series now includes robust IP 65/67 cameras with maximum application flexibility by a selection of more than 70 industry-standard CMOS cameras with resolutions from VGA to 12 megapixels. Sony Pregius sensors of the second generation offer exposure times down to 1 μs and make the cameras ideal in light-intense applications such as laser welding or in high-speed tasks like pick and place to minimize blur. The CX cameras with ON Semiconductor PYTHON sensors enable more than 1000 frames/s by ROI (Region of Interest) selection. Where used in combination with GigE models in burst mode and a sequencer capable of taking image sequences with image-related settings, the cameras offer virtually unlimited solutions in highly-dynamic applications.

... Full Description

The CX series now includes robust IP 65/67 cameras with maximum application flexibility by a selection of more than 70 industry-standard CMOS cameras with resolutions from VGA to 12 megapixels. Sony Pregius sensors of the second generation offer exposure times down to 1 μs and make the cameras ideal in light-intense applications such as laser welding or in high-speed tasks like pick and place to minimize blur. The CX cameras with ON Semiconductor PYTHON sensors enable more than 1000 frames/s by ROI (Region of Interest) selection. Where used in combination with GigE models in burst mode and a sequencer capable of taking image sequences with image-related settings, the cameras offer virtually unlimited solutions in highly-dynamic applications.

... Full Description

The IP 65/67 housing was developed in accordance with EHEDG guidelines. Thanks to its round shape, liquids flow off quickly without forming dirt pockets. The hard anodized surface also resists intensive cleaning processes. The washdown design of the EHEDG-compliant, IP 69K, stainless steel housing, eliminates the possibility of product residue adhesion, facilitates residue-free cleaning and prevents the formation of bacteria. With a surface roughness of less than 0.8 µm and food-grade, hard-wearing seals, it is also suitable for splash and food zones in which oils and greases or chemically aggressive cleaning media are used. The housing kits are supplemented by an extensive range of tubes to meet the various application requirements. Tubes are available with different cover glass materials such as acrylic glass or chemically strengthened alumino-silicate glass with high scratch, impact and fracture resistance as laminated safety glass for a long service life.

... Full Description

CCS offers over 2,435 products for machine vision/inspection applications and continuously develops new products to suit the needs of our customers. This includes Intelligent Lighting with consistent intensity and Industry 4.0 compatibility. Also available are LED lights and controllers for specialized business fields such as microscopy, art galleries/museums, medicine, and agribiotech.

... Full Description

This Digital Control Unit can be used for LED Light Units with an input voltage of 24 V within a total power consumption of 28 W. This Control Unit operates on a 100 to 240 VAC input and measures 84 x 82.6 x 120 mm (width x depth x height). External control through Parallel communications.

... Full Description

Genie Nano is designed to use a range of leading CMOS image sensors, including models from Sony's Pregius and ON Semiconductor's Python lines. With resolutions from VGA to 25 megapixels, the Nano delivers high speed, low noise, and global shutters.

... Full Description

Combining high-speed image acquistion with user-programmable FPGA's (Field Programmable Gate Array) and graphical FPGA development tools, Dalsa's vision processors deliver power and flexibility in real-time image processing.

... Full Description

The FP220 is the first of a new generation of high-power LED lighting controllers which has been designed specifically for demanding machine vision applications. The controller features a unique output drive technology which can create very fast, accurate light pulses. The result is a lighting controller which has industry-leading performance for high-speed, high-power pulsing with low power dissipation. In addition to its high-power mode, it has very stable low-current performance down to less than 1mA.

... Full Description

Machine vision imaging filters including polarization and bandpass filters.

... Full Description

Cutting-edge machine vision LED lighting & control technologies in an effort to simplify innovation and increase customer return on investment.

... Full Description

Metaphase Technologies’ Digital Dimming Controller (DDC-3) provides 0-10VDC dimming control for three independent LED loads in increments of 0.1V. The DDC-3 may be remotely controlled over Ethernet using Metaphase Technologies’ MetaBOSS Windows software or by third-party programs using DDC-3’s Ethernet Commands. User-adjustments of the DDC-3 are provided by way of a user-friendly LCD interface.

... Full Description

The Sensopart Visor is a powerful, simple to use vision sensor. It is available in an Object Sensor, Color Sensor, Code Reader, and the All-around that combines these options into one.

... Full Description

Innovative lighting solutions like dome, and dual-axis RGB, washdown, ring, and structured lighting.

... Full Description

Intelligently designed mounting solutions for our popular industrial vision lines, robust and compact enough for any application.

... Full Description

TECHSPEC® 1.1” HP Series Fixed Focal Length Lenses are designed for the harsh demands of factory automation (FA) and machine vision (MV) applications. The 8mm, 12mm, 16mm, 25mm, and 35mm lenses are compatible with 1” and 1.1” sensor formats, while the 50mm lens is compatible with up to 4/3” sensor formats. The f/1.8 and f/2.8 apertures provide increased light throughput and high resolution performance. TECHSPEC® 1.1” HP Series Fixed Focal Length Lenses are C-Mount and feature a locking focus and iris rings to prevent unwanted adjustments, as well as a front filter thread for integrating standard optical filters.

... Full Description

In line with the increasing use of high-resolution CCDs in recent years, even among cameras in the FA/machine vision markets, Fujinon offers many models of compact, lightweight, high-resolution, low-distortion lenses.

... Full Description

Navitar imaging solutions provide the eyes of automation for machine vision.

... Full Description

Opto Engineering designs, manufactures and markets imaging components in order to solve every machine vision application. Today we can say that they specialize in: optical imaging technologies. ... Full Description

Jos. Schneider Optische Werke GmbH is a worldwide acclaimed manufacturer of high performance lenses for industrial applications with more than 100 years of experience.

... Full Description

High-end color sensor with up to 12 storable colors and programmable through I-O link. It has IP69 housing.

... Full Description

The Sensopart F55 series combines a robust stainless steel IP69K housing with long sensing ranges and tight background suppression.

... Full Description

A precise, installation-friendly solution for detecting free-falling objects, the Frame Light Grid is a one-way system with sender / receiver in the same frame. It can detect objects down to 1mm, and comes in 3 different sizes.

... Full Description

Background suppression laser proximity sensor. It has a 16-120 mm sensing range.

... Full Description

High precision, clear material, laser sensor.

... Full Description

Background suppression laser sensor with 100-1700 mm sensing range.

... Full Description

The Sensopart FT10 series is available in LED and laser versions. Its precise, teach-in background suppression and compact size make it perfect for applications in tight spaces.

... Full Description

The FT50 C-UV can evaluate luminescences over the entire range of visible light, and ignores gloss and flutter. It is able to reliable detect the fluorescent mark even when it is faint.

... Full Description

The Sensopart color sensor uses a white light, and can store 5 reference colors. It can be taught a color range instead of a specific color, giving it even more application flexibility.

... Full Description

The Sensopart F55 series combines a robust housing with long sensing ranges and tight background suppression. For tough washdown areas it is available with a stainless steel housing.

... Full Description

The Vertex family is more robust, much faster, and significantly friendlier to the environment. The diaphragm thickness is pressure range dependent and can be up to 7.5 times thicker than a traditional sensor. Add to these features, a diaphragm composition of Inconel 718 coated with the corrosion and abrasion resistant properties of Dymax® and experience the true definition of a robust sensor that has proven to increase the life of the sensor. There is no mercury, no NaK, no oil, no Gallium, no fill material what-so-ever. An optional Type J or K thermocouple is available to provide a melt temperature signal as well as a 4-20 mA temperature output. Vertex is equipped with a 1/2-20 UNF for installation in standard transducer mounting holes. A sealed welded shell and electrical connection are available if washdown capability is needed for food or medical applications.

... Full Description

The PT46x4 sensor provides the industry standard 4-20 mA amplified signal designed to work with DCS and PLCs. The PT46X4 comes equipped with adjustable zero and span side-mounted potentiometers. PT46X4 Series mA sensors can be rezeroed in two ways: locally via the zero potentiometer, or remotely via shorting two pins together (contact closure). Optional thermocouple or RTD configurations are available to provide melt temperature. Features a 1/2-20 UNF thread for simple and easy installation in standard transducer mounting holes.

... Full Description

The perfect choice for less demanding applications, the Echo series is trusted for quality, reliability and accuracy at an affordable price. With stainless steel wetted parts, .5% accuracy, and 1.5M to 10M psi pressure range capability, Echo sensors offer performance that other economically priced sensors can't match.

... Full Description

The 1490 is a Universal Input Indicator with single or dual configurable alarms, optional linear retransmission of Process Variable, Transmitter power supply option as well as optional Modbus communications.

... Full Description

The ATC990 Process Controller provides a cost-effective way to control a single process parameter, such as for a plastics extruder. Designed to improve user efficiency many features are integrated to reduce commissioning time, simplify operation and minimize maintenance downtime. Reliably auto-tune and alarm on strain gauge, DC voltage, temperature or current inputs. The ATC990 can also control differential pressure when an optional secondary strain gauge input is used. 

... Full Description

The UPR900 is a compact 1/4 DINprocess indicator. It can handle strain gage, voltage, and current signal inputs. It has 2 assignable alarms with an option for a third. The bright display is easily readable and display trending graphs.

... Full Description

Ceramic Band Heaters transmit heat through both conduction and radiation. The element winding is designed to run at maximum temperature and heat the ceramic blocks to the point at which they radiate energy into the barrel as well as conduct energy by being in contact with the barrel. Therefore, the fit is not as critical as in other types of bands. Ceramic Band Heaters are manufactured in a full range of standard construction variations, physical dimensions, electrical ratings, and a complete arrangement of screw terminals and lead terminations.

... Full Description

Specially formulated mineral insulated tape providing excellent thermal conductivity and dielectric strength is used to insulate the nickel chrome resistance wire from the stainless steel sheath. The heater assembly is formed under pressure to a precise diameter with a thin low-mass cross section, assuring fast heat-up rates and reduced cycle times.

... Full Description

... Full Description

Differential pressure monitoring is an excellent way to detect flow issues, particularly through the screen changer. The difference in pressure is monitored in the UPR900 from 2 pressure transducers, with an output to alert of blockages.

... Full Description

The LCR7000 Series Capillary Rheometers offer many new features. They are versatile and easy to use yet offer the most sophisticated materials characterization, data analysis, and reporting capabilities. The LCR series can be used with a standard load cell and a barrel mounted pressure transducer. LAB KARS is the most powerful and easy to use rheological Windows™ based software package available. 

... Full Description

Developed from customer feedback, the LMI incorporates a color touch screen with a simple menu structure, USB communications, pneumatic weight lift system with stackable weights, a force packer, high accuracy digital encoder, and a redesigned auto cutter option.

... Full Description

With an array of features and benefits ranging from ground-breaking accuracy to unified software between all laboratory and online production equipment, the LMI5500 is incredibly advanced and designed just for the thermoplastics resin industry. The LMI5500 brings a new level of ease of use with its removable inspection plate, increased access for sample cutting, and improved touch screen. It is capable of delivering a wide range of data for melt flow rate, shear stress, shear rate, apparent viscosity, instinsic viscosity, melt density, and testing conditions.

... Full Description

Fluidized Temperature Baths typically provide faster processing times than ovens and furnaces and are much more thermally stable and uniform. Fast heat up of immersed parts and objects is another major advantage. Fluidized baths are safer to operate than molten salt baths while immersed objects come out clean and dry with no material to remove.

... Full Description

The ViscoSensor provides continuous measurements of the melt flow rate or apparent viscosity directly on the manufacturing process. The ViscoSensor system consists of two parts: a Viscosensor Rheologic Sensing Unit (RSU), connected directly to the process, and a Rheologic Control Unit that controls the ViscoSensor test parameters, provides outputs of computed results, and provides communications to an external distributed control system when required.

... Full Description

The LME is a versatile lab tool for evaluating the processability of a variety of plastics, rubbers and additives prior to production. The screwless design enables the LME to mix, compound and extrude materials that vary widely in both physical form and characteristics.

... Full Description

Dynisco's flagship line is renowned for reliability, precision, and long life. Offering plus or minus .15% to .5% combined error, simple installation, and repeatability, the Benchmark line includes SPX smart industrial transmitters for use in hazardous locations, and Guardian sensors with built in relays that signal overpressure.

... Full Description

For washdown applications in the food and medical industries, the Vertex is available with a welded housing and special cable, and is still covered with the 4 year warranty.

... Full Description

The Dynisco BP420 burst plugs / rupture disks are specifically for use in extrusion systems. They are designed for reliable, emergency relief of excess pressure in a system. They will instantaneously rupture at a specific, predetermined pressure and temperature.

... Full Description

Heater with NPT fitting and 5-pin industrial connector molded to the cord.

... Full Description

These melt bolt thermocouples can be installed wherever standard melt thermocouples are in use, and is MgO insulated. The tip can be field adjusted from flush to 2 inches and the bolt with Teflon® insert at tip has a maximum operating temperature of 500°F (260°C); without insert 1400°F (760°C).

... Full Description

Spiral armor allows for infinite depth adjustability with standard bayonet fitting.

... Full Description

Melt Bolt Thermocouples are for mounting directly into extruder heads and into the injection molding machine nozzle with the sensor end protruding directly into the Teflon® melt. Immersion length, lead wire and wire connections are available in multiple configurations. 

... Full Description

Accurate Thermal Systems manufactures Fluidized temperature baths to meet a wide range of applications where a stable and uniform temperature environment is required. They have been used for decades to clean extrusion tooling and all other types of hardware, shape set medical devices, calibration, testing various sensors and systems, heat treatment of metals as well as heating of reactors, coils, flasks and containers.

... Full Description

The clever level is a universal point level detection sensor, regardless of the medium: liquid, pasty, sticky, or solid. Intelligent media detection without changing settings. The clever level has the ability to distinguish foam and liquid and detects separating layers.

... Full Description

The FlexFlow PF20H is a flow measurement sensor capable of 10-400 cm per second. It is SIP/CIP- capable without restrictions up to 150 °C / 24h. It has a broad portfolio of process connections and can handle flow and temperature measurement in a single sensor. It is also available with IO-Link interface.

... Full Description

The hydrostatic Pressure level has Measuring range from 0-1000 psi. It has a Flush membrane and a display with tank content indicator and calculation functions.

... Full Description

With a Potentiometric Level Transmitter and wetted parts in acid-proof, stainless steel and PEEK. The LSP is compact, food compatible, has a hygienic design and is 3-A approved / FDA and EHEDG compliant. It has a process temperature -20...140°C and a defined empty registration. It is unaffected by strong adhesive media and has a configurable measuring range.

... Full Description

L-shaped Cast-In Heaters are designed for square/rectangular applications such as food extrusion. For mounting purposes, heaters can be designed with 45° flanged ear extensions that are bolted and drawn together, or can be made with through holes machined into the casting body to bolt directly onto the barrel itself. Thermocouple and transducer holes or other special features can be accommodated as well. To enhance cooling capabilities, or to be used in place of integral feed screw cooling, “L” shaped heaters can be manufactured with cast-in cooling tubes to satisfy liquid cooling requirements. This feature allows processors the ease of changing a single unit at a time, thus representing a far less time-consuming and less expensive alternative should a cooling line become clogged or severely restricted.

... Full Description

The Euchner MGB incorporates a safety switch, bolt and door-locking mechanism into a cohesive package ideal for machine builders, safety engineers and process system designers.

... Full Description

The safety hinges ESH are safety devices for monitoring movable safety guards, such as doors or covers on machinery or systems.On the safety hinges ESH-ARO... the operating point can be adjusted as often as necessary.

... Full Description

Thanks to its compact dimensions of 120 x 36 x 25 mm, the door locking mechanism CTM is particularly simple to integrate into the machine design. The innovative ball actuator supported on an elastomer bearing can secure doors with extremely small pivoting radii. This type of guard locking offers maximum flexibility to the design engineer.

... Full Description

CEM Non-Contact read heads are used to monitor the position of movable machine guarding by means of Inductive Coding. These systems are designed for use in areas where a high level of tamper resistance and safety is required. These systems feature an inductive read head, external evaluation unit / safety module, and a digitally coded actuator. A CES read head and a solenoid are integrated into the CEM read head. The CEM read head is connected to the CES evaluation unit with a round M8 plug connector. The CEM actuator has a metal plate in addition to the transponder; this plate acts as an armature for the solenoid coil.

... Full Description

EUCHNER CES-A-LSP Non-Contact Safety Switches are used to monitor the position of movable machine guarding by means of Inductive Coding. These systems are designed for use in areas where a high level of tamper resistance and safety is required. These systems feature an inductive read head, evaluation unit / safety module, and a digitally coded actuator. Unlike universally coded magnetic switches, the CES actuators are uniquely coded and cannot be bypassed by any means. The safety switch CES-A-LSP read heads and actuators are small designed for mounting on aluminum frames, being held into place with T-bolts. These safety switches allow for misalignment in the verticle and horizontal directions due to the large hysteresis. The CES read heads and actuators are used in conjunction with CES evaluation units. The evaluation units determine if the combination functions as a Unicode or Multicode system.

... Full Description

EUCHNER CES-A-LSP Non-Contact Safety Switches are used to monitor the position of movable machine guarding by means of Inductive Coding. These systems are designed for use in areas where a high level of tamper resistance and safety is required. These systems feature an inductive read head, evaluation unit / safety module, and a digitally coded actuator. Unlike universally coded magnetic switches, the CES actuators are uniquely coded and cannot be bypassed by any means. The safety switch CES-A-LSP read heads and actuators are small designed for mounting on aluminum frames, being held into place with T-bolts. These safety switches allow for misalignment in the verticle and horizontal directions due to the large hysteresis. The CES read heads and actuators are used in conjunction with CES evaluation units. The evaluation units determine if the combination functions as a Unicode or Multicode system.

... Full Description

CET-AR Category 4, Non-Contact Safety Switches are used to monitor the position of movable machine guarding by means of Inductive Coding. These systems are designed for use in areas where a high level of tamper resistance and safety is required. These systems feature an inductive read head with integral evaluation unit / safety module, and a digitally coded actuator. Unlike universally coded magnetic switches, the CES actuators are uniquely coded and cannot be bypassed by any means. The safety switch CET-AR with guard locking is based on the proven transponder principle. The CET-AR has an integrated evaluation module making it a complete package.

... Full Description

CMS safety switches are magnetic (non-contact) read heads that sense a coded magnetic actuator. The read heads only respond to specifically coded actuator types to pervent tampering. CMS evaluation units can be chosen depending on the number of read heads used and the overall system safety category desired. The CMS magnetic systems are particularly suitable for areas where dirt and cleaning are major factors. Actuators and read heads can be fitted behind stainless steel making them ideal for pharmaceutical and food industry applications.

... Full Description

Like all safety switches from the CTP series, the stainless steel CTP fea-tures guard locking with guard lock monitoring. It achieves category 4/PL e in accordance with EN ISO 13849-1, without additional fault exclusion, and complies with all the requirements of EN ISO 14119. With its high degrees of protection IP 69/IP 69K and a locking force of 3,900 N.

... Full Description

Safety system with guard locking and integrated evaluation electronics including handle module. There are several functions in one solution: door handle, safety door protection, door stop, lockout mechanism. There is optionally with control elements, emergency stop device and escape release. Category 4/PL e according to EN ISO 13849-1 and integrated AP/AR electronics. There is a door monitoring output and its suitable for doors hinged on the right or left and for sliding doors.

... Full Description

Allows for very fast log-on to a system with no need for passwords or keyboards. Different levels of system access can be assigned to different keys, and log-on data can be stored to track accountability. Available in a safety version with fail-to-safe contacts.

... Full Description

The EKS light is a read-only access system that does not require a full control system for integration. The keys and reader are set-up with a menu-driven software program.

... Full Description

The safety system ESL combines a safety switch, door handle and door stop in one device. It consists of a handle module and an interlocking module equipped with integrated transponder-coded safety technology. The ESL is used to safe guard and monitor safety guards such as small hinged doors and flaps on machines and installations. Thanks to an assured switch off distance (Sar) of 0 mm it is particularly suitable for usage in laser installations.

... Full Description

Locking (without guard locking). Illuminated emergency stop according to ISO 13850. 2 illuminated white pushbuttons with symbol. Version with blanking cover. Connection via plug connector RJ45, AIDA compliant. Integrated switch. Adjustable door hinge; factory setting: right. Unicode.

... Full Description

HBA Pendant Stations are our smallest hand held control devices that allow tasks such as machine setup, troubleshooting and maintenance to be performed at the point of operation.

... Full Description

Rope Pull Switch (RPS switch) provides protection across large areas, compared to an Estop button. Operation is possible along the whole rope length, and not just a small area within reach of the switch.

... Full Description

The CEM safety switches have, in addition to the transponder, a mounting magnet for holding the guard in the locked position. With this style of interlock there are no longer any protruding parts and therefore no risk of injury. The devices have no insertion openings for actuators in which dust can collect.

... Full Description

STA Safety Switches are used to protect personnel by monitoring and interrupting the safety circuit depending on the position of the machine guard. The locking solenoid holds the guard closed until a stored energy hazard has dissipated. It can also prevent damage to a part in process due to an inadvertent machine shutdown. To meet current worldwide standards, safety interlock components cannot be easily bypassed. These switches have positive opening contacts and redundancy to guarantee that they fail to a safe state. The robust metal safety switch STA is dimension-compatible with the proven EUCHNER safety switches TP and STP in plastic housing.

... Full Description

STM Safety Switches Switches are used to protect personnel by monitoring and interrupting the safety circuit depending on the position of the machine guard. The locking solenoid holds the guard closed until a stored energy hazard has dissipated. It can also prevent damage to a part in process due to an inadvertent machine shutdown. To meet current worldwide standards, safety interlock components cannot be easily bypassed. These switches have positive opening contacts and redundancy to guarantee that they fail to a safe state. Due to its small design, the STM safety switch with plastic housing is particularly suitable for applications in which robustness is required in combination with small dimensions.

... Full Description

Design Type 2 Safety Switches are used to protect personnel by monitoring and interrupting the safety circuit depending on the position of the machine guard. The locking solenoid holds the guard closed until a stored energy hazard has passed. It can also prevent damage to a part in process due to an inadvertent machine shutdown. To meet current worldwide standards, safety interlock components cannot be easily bypassed. These switches have positive opening contacts and redundancy to guarantee that they fail to a safe state. The TQ switch is Euchner's smallest solenoid locking safety switch with its flat pack style and integrated cable.

... Full Description

TZ Safety Switches are used to protect personnel by monitoring and interrupting the safety circuit depending on the position of the machine guard. The locking solenoid holds the guard closed until a stored energy hazard has passed. It can also prevent damage to a part in process due to an inadvertent machine shutdown. To meet current worldwide standards, safety interlock components cannot be easily bypassed. These switches have positive opening contacts and redundancy to guarantee that they fail to a safe state. The metal TZ switch has become a standard within the machining industries and is always evolving with each new innovation to safety switches.

... Full Description

Designed to operate in only one position enabling switches causing a stop condition in any other position (in accordance with NFPA 79). In hazardous locations, the safety guard may need to be disabled an enabling switch allows for the machine operation to occur. Euchner offers two position (OFF-ON) (dead-man switch) and three position (OFF-ON-OFF) (live-man switch) versions fixed location styles and handheld. The three position dual channel model conforms to ANSI/RIA R15.06-1999 for Industrial Robots and Robot Systems – Safety Requirements.

... Full Description

• Screen sizes from 8.4" to 42"

• Resistive, Capacitive, SAW, IR & Projected Capacitive

• USB and RS-232 serial interfaces

• Standard or Sunlight Readable

... Full Description

• Screen sizes from 8.4" to 50"
• Wide range of styles and configurations
• Enable simple integration into your enclosure, panel, machine, or kiosk

... Full Description

• Screen sizes from 8.4" to 65"
• Stainless steel or aluminum enclosure
• Standard brightness or Sunlight Readable
• Indoor (washdown) or outdoor use
• Monitors and touch screens

... Full Description

• Screen sizes from 8.4" to 19"
• Ideal for legacy systems
• Compatible with 4:3 analog cameras
• VGA, S-Video, BNC, RCA, DVI, and HDMI video inputs
• NTSC/PAL Auto Recognition

... Full Description

• Monitors can be modified to meet your needs
• We can custom-build monitors to your exact specifications
• Can be private-labeled with your company name, logo and model number

... Full Description

• Conform to UL 60601-1; Ideal for operating rooms, hospitals, and medical equipment
• Available with touch screen
• Internal or external Medical-Grade power supplies
• VESA holes for tabletop, wall, boom or ceiling mount
• Available with DICOM Compliance

... Full Description

• Screen sizes from 8.4" to 24"
• Monitors and touch screens
• Steel or stainless steel bezels
• Standard or waterproof

... Full Description

• Screen sizes 8.4" to 86"
• Ideal for use in direct, bright sunlight
• Brightness up to 2,500 nits
• Optical Bonding reduces reflections, improves contrast, and increases ruggedness

... Full Description